Choose a rosin press by its documented platen construction and suitability for your application, not by a metal name alone. “Stainless steel press” may describe the housing rather than the platen. “Bi-metal” describes a combination of materials, but still leaves the surface, thickness and assembly details to be confirmed. Request these details for the exact machine being offered.
This guide is for buyers shortlisting complete machines or specifying an OEM configuration. It explains how to compare aluminum, stainless and combined-material descriptions without assuming one label guarantees better heating, longer life or approval for a particular application.

Identify which part the material description covers
| Description in an offer | Clarification to request | Purchasing implication |
|---|---|---|
| Aluminum platen | Alloy if specified, working-surface finish, thickness and any coating or cover | Compare the actual offered surface and construction, not a generic metal claim. |
| Stainless platen | Whether the whole platen or only a facing is stainless; grade where documented | A stainless appearance does not identify the internal structure. |
| Bi-metal platen | Core material, facing material, layer dimensions and attachment method | Two material names do not establish assembled-machine performance. |
| Stainless body or frame | Which enclosure or structural parts the description covers | Do not copy the housing description into the platen specification. |
For a documented market example, Cannabis Hardware’s plate FAQ describes an aluminum body capped with stainless steel. This demonstrates why “bi-metal” and “solid stainless” should not be treated as the same construction. It does not establish that EXTRACTPHYTO supplies that design or that its performance claims apply to another machine.
What the EXTRACTPHYTO catalogue confirms
The 2113 electric press page describes a solid aluminum heating platen. Buyers considering that configuration can request a model-specific quotation and supporting specification. The published description and specification table currently contain different plate-size wording, so obtain one confirmed dimensioned drawing before ordering; do not choose whichever figure seems preferable.
Other models in the Rosin Press Machine catalogue need their own material confirmation. Do not assign the 2113 platen construction to the entire range. Stainless-facing, bi-metal and special-alloy options are not confirmed by this guide. Ask whether an alternative is available and require a clear response before including it in an OEM brief.

Compare the complete assemblies under stated conditions
A material preference should become a purchasing requirement that can be checked. State whether you need a particular working surface, a documented finish, a compatible cleaning method or an agreed thermal characteristic. Ask the supplier which requirement it can meet and what evidence supports that answer.
For heating comparisons, request evidence for the actual platen assembly rather than using the material label as a performance result. Heating elements, sensor location, geometry and the assembled design also need to be identified. Use the temperature-report checklist to distinguish the controller reading, surface variation and stability over time. This article does not supply an operating recipe or an acceptance tolerance.
Keep application restrictions in the selection decision
An aluminum or stainless working surface does not by itself establish that a complete machine is suitable for food processing. The published 2113 and CP3815-1 pages explicitly exclude that application. Do not treat a material document, a surface photograph or an OEM logo request as removing the restriction. Describe your intended use before seeking a recommendation.

Use a short comparison record
- Supplier, machine model and proposed configuration revision.
- Upper and lower platen material and working-surface description.
- Confirmed dimensions and any coatings or separate facing layers.
- Requested evidence, its scope and unresolved differences.
- Application limitations, compatible care instructions and relevant documents.
- Price of the confirmed complete machine, with optional changes listed separately.
If replacing a platen on an existing press is the actual goal, identify the existing model and obtain compatibility confirmation. A matching visible width and length do not prove that mounting, heaters, sensors or the intended assembly are interchangeable. Do not buy an unconfirmed replacement based only on the material comparison.
Request a platen specification and model review
EXTRACTPHYTO is a China-based manufacturer. Contact the team to evaluate the catalogue aluminum-platen option or to check the feasibility of a clearly specified alternative. Ask for a quotation only for the configuration and application that can be confirmed.
- Intended application and any mandatory material requirement
- Model shortlist and required platen dimensions
- Working-surface or construction preference, with reasons
- Voltage, frequency and plug requirements
- Quantity, destination country/postal code and any sample needs
Send the details you have; mark undecided specifications or quantities “please advise.” Any sample order, customization, minimum quantity, price and delivery terms need confirmation for the selected configuration.
Email a platen selection enquiry · Use the contact form
The email button opens a prepared message. For the form, include reference RP-PLATEN-20261118 and this article URL in your message. Send drawings and photos by email to [email protected].
Catalogue and supplier FAQ checked 18 November 2026. No comparative performance test, certification or unlisted material option is claimed.



